WIFI REMOTE Wi-Fi 802.11 b/g DAQ TCP/IP controller - 32 I/O

Wi-Fi 802.11 b/g DAQ TCP/IP controller - 32 I/O

Multifunctional standalone embedded Wireless / Ethernet device for remote management and control with TCP/IP socket based protocol, Web, Telnet and serial commands access.

DAEnetIP3-WT brief description

DAEnetIP3 - WT is multifunctional standalone embedded Wireless / Ethernet device for remote management and control with TCP/IP socket based protocol, Web, Telnet and serial commands access. Many controllers can be connected over LAN / WAN / WLAN or serial network. It can work standalone (without PC). A/D inputs can control outputs. Several such controllers can work together (in distributed LAN/WLAN network) and inputs of one controller can control outputs of another one. It supports TCP/IP socket protocol for custom software development with optional RC4 encrytion. (There are examples for TCP/IP communication in different languages).
It may be used for applications such as remote control over ethernet / internet, home automation, sensor processing, DAQ, simple PLC applications

DAEnetIP3-WT Specification

• 10/100 Mbit Ethernet interface with Link Led. Auto MDIX
• Wireless Wi-Fi 802.11 b/g interface with Link led. Supports WEP - 64 and WEP - 128. It can not work as AP (Access Point), but must connect to another AP (Wi-Fi router for exmple, PC)
• UART interface for RS232/RS485 serial connection with other such controllers. UART can be used also for configuration of the parameters
• Power supply: 12VDC
• Consumption 170 mA / 12 VDC.
• 1 x 16 digital inputs. Levels: 0 – 3.3V
• 1 x 8 digital outputs. Levels: 0 – 3.3V
• 1 x 8 analog outputs. Referent voltage: 2.5 V, resolution: 10 bits
• On boot the outputs are set with states before reset
• Built in RTC (Real Time Clock). It can be synchronized via NTP
• Capacitor power backup keeps time for days during power failure
• Integrated WEB server with authorization – no need of extra software
• The web server supports auto-refresh for the I/O values (no need to click browser refresh button each time)
• Simple web drop-down list configuration
• Telnet
• Supports special ASCII DAEnetIP3 application protocol for configuration over TCP/IP socket, Telnet and UART
• Easy software development
• All the accessing ports can be defined by the user (necessary for “port forwarding”)
• Supports ICMP (ping)
• TFTP protocol - users can install firmware updates when available
• Optional RC4 encryption for user software development
• 19 modes for I/O lines such as inverting, timer, pulses, setting output via input and switch ON/OFF according particular time (scheduling)
• Any input may be referred to control any output of this or another DAEnetIP3 controller in the TCP/IP network
• Distributed mode
• IP address protection
• Power and status led
• Size: 108mm x 45mm x 24mm
• Software examples in VB6 and BCB6  

For full technical description please download the DAEnetIP3 user's manual  

It is possible functions by customer's request to be created (for example web pages modification) or put your Logo and company name.

www.denkovi.com

HOME CONTROL Wi-Fi IEEE 802.11 b/g Eight Channel Relay Board

Wi-Fi IEEE 802.11 b/g Eight Channel Relay Board

Wi-Fi Wireless 802.11 b/g 8 channel Relay board with many functions. Supports Web access (HTTP), Telnet, TCP/IP protocol with RC4 encryption, Ping, TFTP, NTP. It is based on DAEnetIP3-WT controller which has also 8 analog inputs and 8 digital inputs and each of them may control the relays in different modes. 

Brief description of the device:

This is kit of DAEnetIP3-WT IP controler and Relay card with 8 relays with high quality and low cost. It is autonomic Wireless/Ethernet device. Just connect the device into your LAN/WAN/WLAN (Wi-Fi AP) and controll it from another PC, located in the same network or internet. You may access the device via Web browser, Telnet, TCP/IP protocol (the device works as TCP/IP server) and Serial (UART, RS485) communication. The device is also supported by DRM Software.
The DAEnetIP3 controller user's manual may be downloaded from here. So all the features for DAEnetIP3 are available for this device, because we just added the Relay board to makes your project and development easier.
It suports TCP/IP socket protocol for custom software development with optional RC4 encrytion. (There are examples for TCP/IP communication in different languages).

Brief features of the device:

• Ethernet 10/100 MBit. Auto MDIX
• Wireless Wi-Fi IEEE 802.11 b/g - supports WEP 64 and WEP 128
• 12VDC power supply
• Consumption 470 mA / 12 VDC
• 8 relays RAS-12-15. (Each relay channel cn handle up to 10A)
• Relays can work in 19 different modes (Timers, Pulses, to be inverted, Set by 2 Time moments)
• Relays can be controlled by the analog/digital inputs of the DAEnetIP3 controller
• Relays control with our popular Windows application - DRM Software
• TCP/IP server
• Web server - access via web browser
• Telnet server
• Examples for Visual Basic 6 and Borland C++ Builder 6.
• Any other function supported by DAEnetIP3 controller is also supported

Application examples

• Remote electrical devices control. Each relay handles 10A at 230VAC.
• Sensor information processing
• Management/monitoring for industrial
• It may be used for simple standalone web based thermostat
• Remote Lock/unlock doors
• Home automation
• It may be used as standalone PLC

The kit includes

• IP controller (Wireless version controller) - DAEnetIP3 - WT
• 8 Output Channel Relay Board - DAE-RB/Ro8-12V
• Flat ribbon labeled cabel

 

                                            

 WEB CONTROL

VIDEO 

www.denkovi.com

   

HOME CONTROL Wi-Fi IEEE 802.11 b/g Data Acquisition I/O Module

Wi-Fi IEEE 802.11 b/g Data Acquisition I/O Module

Powerful Wi-Fi 802.11 b/g and Ethernet industrial controller  (module) with 12 Relays, 8 Analog inputs and 8 digital inputs. It supports Web access (HTTP), TCP/IP protocol with RC4 encryption, Telnet, TFTP, NTP, Ping. Standalone and the inputs may be reffered to control outputs of the current or another module located in the same LAN / WAN / WLAN. 

 

This device is powerful Wi-Fi industrial controller with significant attractive low cost. Many of the features are created because You, the users of denkovi products, asked us for them.
This is set of DAEnetIP3 - WB (the wireless version) IP controller and peripherial board with 12 relay outputs, 8 ADC inputs and 8 digital inputs. It is autonomic ethernet device. Just connect the board into your local network (LAN), Wireless network (WLAN) or internet (WAN) and control it from remote PC or another such device. You may use Web browser, TCP/IP protocol, Telnet and Serial (UART, RS485) communication. Also you can control ONLY THE RELAYS with our DRM Software.
The DAEnetIP3 controller user's manual may be downloaded from here. So all the features for DAEnetIP3 are available for this device, because we just added the peripheral I/O board to makes your project and development easier. 

General features of the device

• Wireless Wi-Fi 802.11 b/g - supports WEP 64 and WEP 128
• Ethernet 10/100 MBit. Auto MDIX
• 12VDC power supply
• Extra PCB openings for better voltage isolation
• Doubled high current tracks
• 12 relay outputs
• 8 analog inputs
• 8 digital inputs
• UART port for RS485 communication with other such devices in serial network
• Digital/analog inputs may be reffered to control outputs of this or another such device from the network
• Sensor supply (12V) directly from the module
• Relays control with our popular Windows application - DRM Software
• TCP/IP server
• Web server - access via web browser
• Telnet server
• Examples for Visual Basic 6 and Borland C++ Builder 6
• Any other functions that are supported by DAEnetIP3 controller

Application examples

• Remote electrical devices control. Each relay handles 10A at 230VAC.
• Sensor information processing
• Management/monitoring for industrial
• It may be used for simple standalone web based thermostat
• Remote Lock/unlock doors
• Home automation
• It may be used as standalone PLC
• It may be used for controlling another such device over the WLAN, LAN without PC. 

WEB CONTROL

VIDEOS

1

2

3

4

5

6

www.denkovi.com

WEB HOME CONTROL IPX800-V3

IPX800V3

Use this Stand Alone webserver and keep control  with your iPhone, iPad...

• 8 Digital Input.
• 4 Analog Input
• 8 Relay (250v/ 10A / channel)
• 2 Digital Counter.
• 1 Ext Port for optionnal I/O.
• Secure access with login et mot de passe.
• Custom embedded webserver.
• Ready for iPad et iPhone.
• Week Timer.
• Send Email
• Send Push notification.
• Machine to machine protocol for control the IPX over TCP/IP.
• Recall Memory
• Assign and link  input to output
•  Impulse and  on/off mode for each channel.
• Seuil réglable sur les 4 entrées analogiques (mode thermostat).
• Get Time with network time protocole.
• Advanced settings: DHCP, IP static, port...
• Support  Dyn-Dns.
• softstart(No relay blinking).
• Din enclosure.
• Power 12Vdc (not provided).
• 1 year garanty.

WEB CONTROL

IPHONE-IPAD CONTROL

GCE-ELECTRONICS.COM

WEB HOME CONTROL IPX800-V2

                              IPX800V2



Wpictures, big html code etc...
You will need more memory  for customizing embedded website.

Power supply: 9Vdc (not supplied)

ith the IPX800 V2 you can send emails if a digital input is active or if analog level is too high or too low.

You can program action like "if input 1 is active then relay 1&2 is On and send a email"
You can program  relay ON/OFF"  only monday or another day or everydays with the week timer. 

                                   

The IPX800 V2 is provided with  4, 16, 32 Mbits Flash mémory.
If you need to add lots

WEB CONTROL

IPHONE-IPAD CONTROL

GCE-ELECTRONICS.COM