HOME CONTROL Wi-Fi IEEE 802.11 b/g Data Acquisition I/O Module

Wi-Fi IEEE 802.11 b/g Data Acquisition I/O Module

Powerful Wi-Fi 802.11 b/g and Ethernet industrial controller  (module) with 12 Relays, 8 Analog inputs and 8 digital inputs. It supports Web access (HTTP), TCP/IP protocol with RC4 encryption, Telnet, TFTP, NTP, Ping. Standalone and the inputs may be reffered to control outputs of the current or another module located in the same LAN / WAN / WLAN. 

 

This device is powerful Wi-Fi industrial controller with significant attractive low cost. Many of the features are created because You, the users of denkovi products, asked us for them.
This is set of DAEnetIP3 - WB (the wireless version) IP controller and peripherial board with 12 relay outputs, 8 ADC inputs and 8 digital inputs. It is autonomic ethernet device. Just connect the board into your local network (LAN), Wireless network (WLAN) or internet (WAN) and control it from remote PC or another such device. You may use Web browser, TCP/IP protocol, Telnet and Serial (UART, RS485) communication. Also you can control ONLY THE RELAYS with our DRM Software.
The DAEnetIP3 controller user's manual may be downloaded from here. So all the features for DAEnetIP3 are available for this device, because we just added the peripheral I/O board to makes your project and development easier. 

General features of the device

• Wireless Wi-Fi 802.11 b/g - supports WEP 64 and WEP 128
• Ethernet 10/100 MBit. Auto MDIX
• 12VDC power supply
• Extra PCB openings for better voltage isolation
• Doubled high current tracks
• 12 relay outputs
• 8 analog inputs
• 8 digital inputs
• UART port for RS485 communication with other such devices in serial network
• Digital/analog inputs may be reffered to control outputs of this or another such device from the network
• Sensor supply (12V) directly from the module
• Relays control with our popular Windows application - DRM Software
• TCP/IP server
• Web server - access via web browser
• Telnet server
• Examples for Visual Basic 6 and Borland C++ Builder 6
• Any other functions that are supported by DAEnetIP3 controller

Application examples

• Remote electrical devices control. Each relay handles 10A at 230VAC.
• Sensor information processing
• Management/monitoring for industrial
• It may be used for simple standalone web based thermostat
• Remote Lock/unlock doors
• Home automation
• It may be used as standalone PLC
• It may be used for controlling another such device over the WLAN, LAN without PC. 

WEB CONTROL

VIDEOS

1

2

3

4

5

6

www.denkovi.com