home control (relay): WIFI REMOTE Wi-Fi 802.11 b/g DAQ TCP/IP controller

Wi-Fi 802.11 b/g DAQ TCP/IP controller - 32 I/O

Multifunctional standalone embedded Wireless / Ethernet device for remote management and control with TCP/IP socket based protocol, Web, Telnet and serial commands access.

DAEnetIP3-WT brief description

DAEnetIP3 - WT is multifunctional standalone embedded Wireless / Ethernet device for remote management and control with TCP/IP socket based protocol, Web, Telnet and serial commands access. Many controllers can be connected over LAN / WAN / WLAN or serial network. It can work standalone (without PC). A/D inputs can control outputs. Several such controllers can work together (in distributed LAN/WLAN network) and inputs of one controller can control outputs of another one. It supports TCP/IP socket protocol for custom software development with optional RC4 encrytion. (There are examples for TCP/IP communication in different languages).
It may be used for applications such as remote control over ethernet / internet, home automation, sensor processing, DAQ, simple PLC applications

DAEnetIP3-WT Specification

10/100 Mbit Ethernet interface with Link Led. Auto MDIX
Wireless Wi-Fi 802.11 b/g interface with Link led. Supports WEP - 64 and WEP - 128. It can not work as AP (Access Point), but must connect to another AP (Wi-Fi router for exmple, PC)
UART interface for RS232/RS485 serial connection with other such controllers. UART can be used also for configuration of the parameters
Power supply: 12VDC
Consumption 170 mA / 12 VDC.
1 x 16 digital inputs. Levels: 0 – 3.3V
1 x 8 digital outputs. Levels: 0 – 3.3V
1 x 8 analog outputs. Referent voltage: 2.5 V, resolution: 10 bits
On boot the outputs are set with states before reset
Built in RTC (Real Time Clock). It can be synchronized via NTP
Capacitor power backup keeps time for days during power failure
Integrated WEB server with authorization – no need of extra software
The web server supports auto-refresh for the I/O values (no need to click browser refresh button each time)
Simple web drop-down list configuration
Telnet
Supports special ASCII DAEnetIP3 application protocol for configuration over TCP/IP socket, Telnet and UART
Easy software development
All the accessing ports can be defined by the user (necessary for “port forwarding”)
Supports ICMP (ping)
TFTP protocol - users can install firmware updates when available
Optional RC4 encryption for user software development
19 modes for I/O lines such as inverting, timer, pulses, setting output via input and switch ON/OFF according particular time (scheduling)
Any input may be referred to control any output of this or another DAEnetIP3 controller in the TCP/IP network
Distributed mode
IP address protection
Power and status led
Size: 108mm x 45mm x 24mm
Software examples in VB6 and BCB6